Similar to zund z20 blade, but zund z22 blade has more robust and with a larger overcut. The zund z22 blades are made from tungsten carbide. carbide blades have a significantly higher life expectancy than high speed steel blades. Greater productivity thanks to fewer blade changes. And better cutting quality thanks to the blade’s precision finish and very high stability.
Zund z23 Flat shank oscillation blade designed to cut small radiuses and intricate detail with low over-cut, suited for corrugated boards, foam boards, plastics and other substrates up to 22mm thick.
High quality blade made of solid tungsten carbide for application in Zund digital cutters. The blade has extreme durability with a maximum cutting depth of 8.7mm. Equivalent to ZUND blade Z26. Long oscillating blade for soft, thick materials.
Tungsten Carbide Zund Cutter Blade Z28, commonly used for Carbon fiber, Corrugated, Nylon fabric, Polyester fabric, Sandwich board, Leather hide, etc. Long oscillating blade for soft, thick materials.
Zund Z29 has gained popularity in the industry, which is tungsten carbide cutting drag blade. These blades are known for their exceptional cutting performance and durability, making them a top choice for many professional cutters.
In the packaging industry, Tungsten carbide zund z33 cutter blade is utilized for creating intricate designs and precise cuts in packaging materials, allowing for efficient production of custom packages.
Tungsten Carbide Drag knife Zund Z34 for Zund automated cutting systems, Knife type is Mat-cutting blade, The commonly used materials of Zund Z34 is tungsten carbide and HM. We mainly produce tungsten carbide blades. Tungsten carbide has obvious advantages over HM in terms of life and cutting effect.
These large mat-cutting blades have a cutting angle of 80°and a maximum cutting depth of 11.3 mm. These blades are suitable for matboards. These high quality generic blades correspond to Zund part number 3910323, also called Z41 blades.
Tungsten Carbide Oscillating Knife Z43 Blade is a common blade in the zund cutting system, also suitable for Esko Kongsberg, Filiz, Haase, Humantec,
Ibertec, Investronica, KSM, Lectra, MFC etc other cutter brand.
The size of zund cutter blade Z45 is the same as that of the Z44. However, it has been changed to a double-end with a cutting edge. The tool is more fully utilized and the cost is higher. When the cutting edge of one end has been destroyed, it can be directly reversed and become a “new tool”.
These high quality generic blades correspond to Zund part number 4800073, also called Z46 blades.
Zund Z53 circular blade is 25mm in diameter and are one of the best blades of choice for cutting Aramid fibre, Fabric, Glass fibre.
+8618628218579
lesley@passiontool.com
+86 13882246828