Esko Kongsberg BLD SR6224 digital knife for Kongsberg Cutter
Product Introduction
The length of Esko SR6224 balde is 39mm with -0.5mm tolerance range, The length of the Esko SR6224 oscillating blade shank is 21.5mm, There is a groove with a depth of 1.25mm on one side of the cutting edge and 4.5mm from the tool handle for installation. the shank diameter is 6mm with -0.015mm tolerance range. The maximum cutting depth of Esko SR6224 oscillating blade is 12mm, the thickness of the cutting edge is 0.6mm with 0.05mm tolerance range.
With the Esko SR6224 oscillating blade cutting edge facing down, the Angle between the cutting edge and the horizontal line is 24 degrees, and the cutting edge Angle is 22 degrees, the Angle between the small cutting edge and the vertical line is 15 degrees. Esko SR6224 oscillating blade is suitable for Kongsberg XL/XN series, Kongsberg XE series, Kongsberg XP, Kongsberg C/V.
Product attribute form
| Part No | Code | Recommend use/Description | Size&Weight | Photo |
| BLD-SR8124 | G42450494 | Good blade for cutting in different plastic corrugated materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8140 | G42455899 | Good blade for cutting in different foam core materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8160 | G34094458 | Good blade for cutting in rigid materials such as different gasket materials, Forex and solid carton board | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8170 | G42460394 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl and paper. For use in the RM Knife tool. Length: 40mm. Cylindrical 8mm. Maximal cutting thickness about 6,5mm. 30' cutting edge. Nominal lag value is 0mm. | 0.8 x 0.8 x 4 cm 0.024kg |
 |
| BLD-SR8171A | G42460956 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 40' cutting edge. asymmetric knife blade that ploughs all burr’s and waste to one side. Very important to control the cutting direction when using this blade. Nominal lag value is 0mm. | 0.6 x 0.6 x 4 cm 0.011 kg |
 |
| BLD-SR8172 | G42460402 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 30' cutting edge | 0.8 x 0.8 x 4 cm 0.024kg |
 |
| BLD-SR8173A | G42460949 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 40' cutting edge. asymmetric knife blade that ploughs all burr’s and waste to one side. Very important to control the cutting direction when using this blade. Nominal lag value is 0mm. | 0.6 x 0.6 x 4 cm 0.011 kg |
 |
| BLD-SR8180 | G34094466 | Similar to SR8160. The blunter angle reduces the risk for breaking the blade in tough materials, but gives more overcut with thicker materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8184 | G34104398 | For RM knife tools only. For cutting thin paper, folding carton and protective foam sheets for flexo plates. Works well on very "fragile" and "porous" materials such as beer coasters with a lot of recycled content. Long life tungsten carbide. Nominal lag value is 4mm. | 0.8 x 0.8 x 4 cm 0.015 kg |
 |
| BLD-DR8160 | G42447235 | Good blades for cutting rigid materials such as different gasket materials, forex and solid carton. Special Tungsten Carbide knife blade with an asymmetric edge, optimized for a nice cut ploughing all the burrs to one side. | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-DR8180 | G42447284 | Similar to DR8160. The blunter angle reduces the risk for breaking the blade in tough materials, but gives more overcut with thicker materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-DR8210A | G42452235 | Special Tungsten Carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8170 C2 | G42475814 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 30' cutting edge. Nominal lag value is 4mm. For use in the RM Knife tool C2 coated for longer life time | 0.8 x 0.8 x 4 cm 0.02kg |
 |
| BLD-DR8160 C2 | G42475806 | Good blades for cutting rigid materials such as different gasket materials, forex and solid carton. Special Tungsten Carbide knife blade with an asymmetric edge, optimized for a nice cut ploughing all the burrs to one side. | 0.8 x 0.8 x 4 cm 0.02kg |
 |
| BLD-SR8174 | G42470153 | The long life tungsten carbide blade for corrugated board, is developed especially for use in the RM and CorruSpeed knife tool. The knife tip is optimized for long life time.Length: 40mm. Cylindrical 8mm. Maximal cutting thickness about 7mm. 30' cutting edge. Nominal lag value is 0mm | 0.8 x 0.8 x 4 cm 0.024kg |
 |
| BLD-SR8184 C2 | G34118323 | For cutting thin paper, folding carton and protective foam sheets for flexo plates. Works well on very "fragile" and "porous" materials such as beer coasters with a lot of recycled content. Long life tungsten carbide. C2 coated for longer life time | 0.8 x 0.8 x 4 cm 0.02kg |
 |
| BLD-DR8260A | G42461996 | Special tungsten carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. Blade tip arrow grinding: 0,5-1,0 | 0.6 x 0.6 x 4 cm 0.02 kg |
 |
| BLD-DR8261A | G42462002 | Special tungsten carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. Blade tip arrow grinding: 0,4-1,5 | 0.6 x 0.6 x 4 cm 0.02kg |
 |
| BLD-DR8280A | G42452227 | Special Tungsten Carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. Good blade for cutting dif | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
Product details
Product Application
Esko SR6224 oscillating blade is made of tungsten carbide or HM(Hard Metal), Esko SR6224 oscillating blade designed to cut thick Cardboard, Rubber and Softer Materials, Corrugated cardboard, Covering, Foam board, Folding Carton, Vinyls.
About Us
Chengdu Passion is a comprehensive enterprise specialized in designing, manufacturing and selling all kinds of industrial and mechanical blades, the factory is located in panda’s hometown chengdu city, sichuan province.
The factory occupies almost three thousand square meters and includes over one hundred and fifty stuff. “passion” has experienced engineers, quality department and completed production system, which includes press , heat treatment, milling, grinding and polishing workshops.
“PASSION” supplies all kinds of cutting machine blades. meanwhile, the customized product is available.
passion's professional factory services and cost-effective products can help you to get more orders from your customers. we sincerely invite agents and distributors from various countries. contact us freely.
