tungsten carbide razor knife pentagon blade for Chemical fiber cutting
Product introduction
1. Fine porosity would be remained in Powder metallurgy of processing for Tungsten Carbide, which will be the beginning of destroy of products.
2. To remove this fine porosity, we PASSION produce products through HIP Process.
3. This process is progressed under the high temperature and pressure, and put the identical pressure on whole surface of product.
4. At this time, a fine porosity would be removed, and effected on improving high strength.
Check nicks for all products
In order to supply good blades to customers, we will check all products to see if there were any nicks.
PASSION blades are strictly checked over 20 inspection process from powder to completed. We can keep and improve our quality, and are very pleased to hear that customers are satisfied with our stabilized products.
Product Application
The companys film cutting blades are available for cutting PP, PE, PET,BOPP films and etc., it also can be used for cutting metal films such as plastic films, capacitor films, and lithium battery diaphragm. The blades we produce are not only sharp, but also able to keep the sharpness lasting. Please experience it for yourself! Highest sharpness and precision,Each blade has an extremely long life. Increased productivity due to increased cutting speed and reduced number of blade changes. The trimming is clean and does not form raw edge.
introduction of the factory
Chengdu Passion Precision Tool Co.,Ltd. is a professional manufacturer and exporter that is concerned with the design, development and production of cutter.
Passion as strong technical force, complete equipment, advanced technology and superior quality products. We use imported high-quality steel for our products, and employ a number of cutter experts, who successfully researched and developed products with high toughness, high durability, high wear resistance and good sharpness.
Product Parameter
| Product Name | Pentagonal Blade |
| Material | 100% raw tungsten carbide |
| Size | Φ69.9*Φ10.35*0.5 |
| Blade MOQ | 10pcs |
| OEM service | Available |
Specification
|
No. |
Size（mm） |
|
1 |
16*8*0.5 |
|
2 |
18.5*11.7*0.5 |
|
3 |
38.1*8*0.254 |
|
4 |
43*22*0.15/0.2/0.3/0.4 |
|
5 |
45*19*0.8 |
|
6 |
57.05*19*0.5*0.4 |
|
7 |
108.08*18*0.4 |
|
8 |
110*18*0.5 |
|
Note：Customization available per customer's drawing or sample |
|
